How to connect to Internet using DG-HR1060MS?
Step 1: Open web browser and enter the IP address of the router in the address bar “http://192.168.2.1”. Press “Enter”.
Step 2: Step 2: Enter the username as “admin” and password as “1234” in the login page. Then click “Login” to log into the router.
Step 3: Click “Wizard” on the top.
Step 4: Click on “Next”.
Step 5: Select “Profile” as shown in below figure & Click on “Set.
Step 6: Click on “Next”.
Step 7: In “SSID” you can change the wireless name for your Wi-Fi network and in “Pre-shared Key” you can set a new wireless password.
Step 8: Click on “Done” to save the settings.
Step 9: Click on “OK”.
After reboot reconnect to the device Wirelessly and browse internet.
How to access the Micro SD Card contents & Internet in DG-HR1060MS?
This procedure is applicable to XP / Win7 / Win 8 / 8.1
1. Connect DG-HR1070MS to PC or Laptop via USB cable which is provided to you.
2. Please wait till drivers get installed.
3. Now Device is ready to use.
4. Click here to open the contents in memory card.
4a. Else Go to My Computer >Double click on Removable Disk.
You can also use Internet via USB cable.
How to enable roaming on DG-HR1060MS?
Step 1: Open web browser and enter the IP address of the router in the address bar “http://192.168.2.1”. Press “Enter”.
Step 2: Enter the username as “admin” and password as “1234” in the login page.
Then click “Login” to log into the router.
Step 3: Click “WAN” on the top.
Step 4: Select “Enable” for Data Roaming & then click on “Change”.
How to set Wireless SSID and Security in DG-HR1060MS?
Step 1: Open web browser and enter the IP address of the router in the address bar “http://192.168.2.1”. Press “Enter”.
Step 2: Enter the username as “admin” and password as “1234” in the login page.
Then click “Login” to log into the router.
Step 3: Click “WiFi” on the top.
Step 4: In “SSID” you can change the wireless name for your Wi-Fi Network. By default it is “DIGISOL”.
Step 5: In“Pre-shared Key” you can change the wireless password. By default it’s “12345678”.
Step 6: Click On “Apply” to save the settings..
