DG-WA1000N AP Bridge-WDS Configuration
– Access the configuration page of the AP using its management IP (default IP address is 192.168.2.1).
– Enter the username as admin, password as 1234.
– Click “Basic Settings” option on the left hand side
– Set the wireless Mode to “AP Bridge-WDS”
– Assign a unique SSID in the “MAIN ESSID” field
NOTE: SSID of DG-WA1000N units in AP Bridge-WDS mode can be different from each other.
Ensure that “Channel Number” and “Security” is same on both the Access points.
– Assign the “MAC address” of 2nd DG-WA1000N unit in the field provided (i.e.MAC address 1)
– Click the “Apply”
– Click “CONTINUE” button to continue configuration
– Click “Security” option on the left hand side
– Under “Security Settings” configure wireless security as per network requirement
– Click the “Apply”
– Click “CONTINUE” button to continue configuration
– Click “Basic Settings” option on the left hand side
– On the configuration page, Click “Set Security” button
– A new window will popup, on which configure wireless security as configured in the “security” settings page.
– Click the “Apply”
– Click the “Apply” if no further configuration is to be done
————————————————————————————————————————
Kindly follow the same steps as illustrated above to configure 2nd DG-WA1000N unit in AP Bridge-WDS mode.
Ensure that “channel number” and “security” is same on both the access points.
Note: Kindly follow the same steps to configure DG-WA3000N in AP Bridge-WDS mode.
————————————————————————————————————————
DG-WA1000N RADIUS Server Configuration
– Access the configuration page of the AP using its management IP (default IP address is 192.168.2.1).
– The default username is admin and password is 1234.
– Click “Security” option
– Under “Select SSID” set “SSID choice” to the SSID for which RADIUS server authentication is to be enabled
– Under “Security Settings” set “Encryption” to “WPA RADIUS”
– Select appropriate “WPA Unicast Cipher Suite” option as per network requirement
– Ensure that the “Use internal MD5/PEAP RADIUS server” option is checked marked
– Click on “Apply” button
– To continue with configuration of DG-WA1000N click on “CONTINUE” button
– Select “Radius Server” option
– Check mark the option for “Enable RADIUS Server”
– Under “Users Profile” assign Username and Password
– Confirm the password by typing it again in Re-Type Password field
– Click the Add button
– The newly created profile gets reflected on the page
– Click on “Apply” button
– To save the settings click “APPLY” button
DG-WA1000N Universal Repeater configuration
– Access the configuration page of the AP using its management IP (default IP address is 192.168.2.1)
– Enter the username as admin and password as 1234
– Click “Basic Settings”
– Set the wireless Mode to “Universal Repeater”
– Assign a unique SSID in the “MAIN ESSID” field
– NOTE: The “MAIN ESSID” can be different from the SSID of DG-BR4000N (In
this example, SSID is Digisol1). DG-BR4000N is having the SSID as Digisol.
Ensure that “Channel Number” is the same on both the Access point and the Repeater
– Assign the “Root AP SSID” (i.e. SSID of DG-BR4000N) in the field provided
– Click on “Apply” button to save the settings
———-OR————-
– cLICK the button “Select Site Survey” to scan for the SSID of router
– A new window will popup, on which select the SSID of the Access Point with which
connection is to be established and press the “Connect” button
– SSID of the main router will show up on the “Basic Settings” page
– click on “Apply” button
– To continue with configuration of DG-WA1000N Click on “CONTINUE”
– Click “Security” option
– If multiple SSIDs exist on DG-WA1000N, under “Select SSID” set “SSID choice” to SSID of DG-WA1000N (Digisol1) which is to be broadcasted
– Under Security Settings set Encryption to the same encryption mode configured on main router
– Click “Apply”
– To save the settings click “APPLY”
